Lighting Lighting - DMX and Artnet 









3pin DMX cable-0.75m












3pin DMX cable -10m












3pin DMX cable -15m












3pin DMX cable-1m












3pin DMX cable -20m












3pin DMX cable-2m












3pin DMX cable-3m












3pin DMX cable-5m












3 pin XLR Male to 5 pin XLR Female


Specifications
Cable length: 25 cm
Double shielded cable
Connector: XLR 3 Pole and XLR 5 Pole










50m 5pin XLR DMX Reel


Blue Drum










5pin 10m DMX cable












5pin 1m DMX cable












5pin 2m DMX cable












5pin 3m DMX cable












5pin 5m DMX cable












5pin DMX cable-20m












5 pin XLR Male to 3 pin XLR Female


Specifications
Cable length: 25 cm
Double shielded cable
Connector: XLR 3 Pole and XLR 5 Pole










DMX Booster 2DMX splitter


DMX distributor with one input and two
outputs.
• Absolutely electric isolation between
input and outputs, or output and output.
• Two type of DMX connector (3 pin & 5 pin)
for each individual channel, each
DMX output features an independent
driver.
• Input and output with a set of power
supply respectively and 50 mA
internal fuse.
• Power input of AC 230V~ 50 Hz.
Specifications
Power input: 230VAC 50/60Hz
Power consumption: 6W
Dimensions: 220 x 130 x 55 mm (LxWxH)
Weight: 1,90 kg










DMX Merge


The Showtec DMX Merge allows you to combine two DMX controllers to one DMX line or to use a second desk as back-up desk.
The unit has 4 modes:
1) HTP (Highest Take Precedence) In this case you can use two similar desks with the same
addressing on one line. The DMX channel with the highest value has priority.
2) Back-up mode. The unit is connected to two DMX desks. Channel A has priority.
Once channel A fails or has no DMX channel B takes over the show.
3) Merge mode. Two desks can be merged on one line. E.g. you can run a scene setter
and DMX operator on one line. The Scene Setter will operate on channel 1-96 and the
DMX Operator will have the channels 97 and higher.
These positions can be freely addressed by the dip-switches.
4) LTP (Latest Take Precedence) In this case you can use two similar desks with the same
addressing on one line. The DMX input with the latest value change has priority.
Specifications
Voltage: 230V
Power Requirement: DC 9V, 300 mA Min.
(AC/DC adapter included)
DMX Input: two 3-pin
XLR male sockets on the front panel
Extra: two 3-pin
XLR male sockets on the rear panel
DMX output: two 3-pin
XLR female sockets on the front panel
Extra one 3-pin XLR
female sockets on the rear panel
Dimensions: 483 x 73 x 45 mm (LxWxH)
Weight: 1,15 kg










DMX Merge Rack












DMX Rack mount splitter


4 output rack splitter










ELC DLN6 Artnet Node


The DLN6X is a versatile and powerful addition to any lighting network as it combines a 6-port DMX to Ethernet node with a 5-port Ethernet switch in a single 1U high unit.
This fully programmable node can be controlled via the LCD menu display and encoder switch on the front panel, or through ELC’s downloadable dmXLAN freeware.
The dmXLAN Node 6X has no fans and is therefore silent in operation, the DLN6X-FI has fully-isolated DMX ports, and both versions may be ordered with optional Power over Ethernet for the three Ethernet sockets on the front panel.
6 bi-directional DMX ports on the rear panel, XLR, RDM compatible
5 Ethernet ports (Neutrik Ethercon) 10/100MBit with integral Ethernet switch
Remote programming and monitoring, remote fixture parameter override
DMX input options (normal or backup)
DMX output options: normal, merging in HTP, LTP, channel custom, priority merging, full softpatch (channel by channel), programmable merging with DMX channel control
Local control via backlit display, rotary encoder/selector pushbutton
Support for WYSIWYG, ESP, Capture










Q buffer DMX splitter