Lighting Lighting - Effects

10m LED rope light set (Blue)

LED ROPE LIGHT SETS Mains powered IP44 rated LED rope light sets with in-line controller providing 8 pre-programmed sequences. High efficiency LEDs produce an equivalent level of brightness to a traditional rice bulb with a fraction of the energy consumption or heat wastage. Equally suited to lighting effects, festive decoration or architectural highlights. 8 programme in-line controller 360 bright, long life LEDs Mains plug to sequence control: 1.5m Sequence control to connector: 0.5m IP44 rated for outdoor use Power supply230Vac, 50Hz LEDs per metre36 Power consumption max.45.6W Operating temperature-40°C to 50°C IP ratingIP44 Minimum bending radius60mm Length10m Tube diameter13mmØ Weight1.7kg

10m LED rope light set (red)

LED ROPE LIGHT SETS Mains powered IP44 rated LED rope light sets with in-line controller providing 8 pre-programmed sequences. High efficiency LEDs produce an equivalent level of brightness to a traditional rice bulb with a fraction of the energy consumption or heat wastage. Equally suited to lighting effects, festive decoration or architectural highlights. 8 programme in-line controller 360 bright, long life LEDs Mains plug to sequence control: 1.5m Sequence control to connector: 0.5m IP44 rated for outdoor use Power supply230Vac, 50Hz LEDs per metre36 Power consumption max.45.6W Operating temperature-40°C to 50°C IP ratingIP44 Minimum bending radius60mm Length10m Tube diameter13mmØ Weight1.7kg

15m LED rope light set (blue)

300mm snowdrop tubes

OUTDOOR SNOWDROP LED LIGHTS These cool white tube lights create a delicate snowfall effect in random snowdrop sequences. Ideal for indoor or outdoor decoration at events, around the home, or for Christmas. 10 tubes with 18 LEDs per tube Random pre-programmed snowdrop sequences Mains plug to power supply: 2m Power supply to first tube: 5.2m Suitable for indoor or outdoor use Please note: Mains plug and power supply must be kept indoors Power supply 240V Power consumption 4.8W LED colour Cool white No. of LEDs 10 tubes of 18 SMDs Tube diameter 13mm Tube drop 300mm Tube spacing 500mm LED length 4.5m Total length 11.7m IP rating IP44 Cable colour Clear Weight 880g

5m Intelligent RGB LED Tape Kit

Intelligent RGB LED Tape Kit This incredible LED tape creates mesmerising and magical colour changing effects. The controller addresses each LED independently to create numerous smooth, fluid, colour changing effects. The tape... 99 modes with 10 speeds levels & 29 static colours with 10 brightness levels Extend up to a maximum of 50 metres Master kit includes: 5m reel of RGB LED tape, power supply and LED controller with 20 key RF remote control

8m LED rope light set (red)

Custom S4 Gobo

Custom S4 Gobo

DIGIDRIVER rack

DIGIDRIVER is a driver which provides power and processing to all the fixtures of the DIGI series (tube, strip, bar, tile). It controls up to 24 DIGISTRIP40, 16 DIGITUBE, 6 DIGIBAR160, 6 DIGITILE144, offering 6 DMX universes and 350W of power in out, in a one-rack unit. DIGIDRIVER is compatible with both Art-Net and Kling-Net protocol and runs signal and power over a 4 pole XLR cable that allows wiring of units in a chain. The user interface consists of a black OLED display for settings, protocol selection, network address and test patterns. Features: Art-Net and Kling-Net control protocol supported Power and signal output up to 24 DIGISTRIP40, 16 DIGITUBE, 6 DIGIBAR160, 6 DIGITILE144 6 Art-Net / Kling-Net universe output 36 V 350 W OUT BODY Body: sturdy die-cast aluminium body conceived for long-time durability Body colour: black CONTROL Control units: 24 DIGISTRIP - 16 DIGITUBE - 6 DIGITILE or DIGIBAR Protocols: Art-Net, Kling-Net DMX channels: up to 3.072channel Pixel control: pixel2pixel control Display: black OLED high resolution display Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included ELECTRONICS Operating temperature: -10° ~ +45° ELECTRICAL Power supply: 100-240 V – 50/60 Hz Power consumption (at 230 V): 350W PHYSICAL Signal connection: XLR 4p IN/OUT connectors Data connection: RJ45 IN/OUT Power connection: Neutrik powerCON IN/OUT connectors IP rating: 20 Dimensions (WxHxD): 483x54x150mm Weight: 2,5kg

DIGITUBE 171 LED Pro Lights

DIGITUBE is an evolution in the range of pixel effects, adding the 3rd dimension to the creation of visual shows through its tubular shapes and capacity to project at 360°. Each tube is equipped with 2 lines of 40 RGB / FC LED with individual pixel control, 1 m long. Its modular design allows DIGITUBE to be mounted and configured with maximum flexibility, such as suspended below the ceiling to create 3D effects on XYZ axes. Features: 40x2 W (40 total) SMD5050 RGB / FC high-efficiency LED Viewing angle: 360° Pixel pitch: 25 mm Multiple hanging solutions for ceiling application Art-Net and Kling-Net control protocol supported LIGHT SOURCE Source: 80x0,25W SMD5050 RGB LEDs Source life expectancy: > 50.000 h OPTICS Field angle: 360° Pixel pitch: 25mm COLOUR SYSTEM Colour mixing: RGB / FC BODY Hardware on-board: on board mechanics for rigging to the ceiling Body: acrylic tube, black PCB Body colour: black CONTROL Control units: DIGIDRIVER (optional) Art-Net channels: 120ch Protocols: Art-Net, Kling-Net Pixel control: pixel2pixel control ELECTRICAL Power supply: DC 36 V Power consumption (at 230 V): 29,3W Output (at 230 V): 16 units on a single DIGIDRIVER line PHYSICAL Sospension and fixing: bracket for truss rigging and hardware for connection of more units Signal connection: Seetronic XLR 4p IN/OUT connectors IP rating: 20 Dimensions (WxHxD): 1155x28x34mm Weight: 0,33kg

DIGITUBE 4pin cable 15m

DIGITUBE 4pin cable 1m

DIGITUBE 4pin cable 2m

Eagle Static LED Rope Light 9m multi colour

A highly flexible and robust decorative rope lighting product supplied with a fitted 1.85m mains lead. The product features ultra bright LEDs producing intense vibrant colours, highly flexible tube allowing complex designs and shapes to be produced and is easy to install using clips and channeling (not supplied). The product is ideal for many decorative uses such as restaurants, shops, homes and for general festive use. The rope light has a wide operational temperature range from -20C to + 60C and can be installed inside and out (when installed correctly).

Eagle Static LED Rope Light 9m Warm White

A highly flexible and robust decorative rope lighting product supplied with a fitted 1.85m mains lead. The product features ultra bright LEDs producing intense vibrant colours, highly flexible tube allowing complex designs and shapes to be produced and is easy to install using clips and channeling (not supplied). The product is ideal for many decorative uses such as restaurants, shops, homes and for general festive use. The rope light has a wide operational temperature range from -20C to + 60C and can be installed inside and out (when installed correctly).

Flame light

The Eurolite LED FL-300 Flame Light Effect is an LED flame light effect, featuring a hanging metal cauldron, with three 80cm chains, a ceiling rosette, and three lamps with 18 LEDs each. The FL-300 is a decorative flamelight with LED technology and an elegant design. Various decoration possibilities are available with three GU-10 230V lamps and 18 LEDs each are included. There is a built-in fuse and on/off switch, and this effect is ready for connection via a power cord with a safety-plug. The main features of the Eurolite LED FL-300 Flame Light Effect include: Hanging metal cauldron with three 80 cm chains and ceiling rosette Elegant design Various deco possibilities Three GU-10 230V lamps with 18 LEDs each are included Built in fuse and on/off switch Ready for connection via power cord with safety-plug Power supply: 230 V AC, 50 Hz~ Power consumption: 21 W Fitting illuminant: GU-10 230V 18 LED Dimensions: 350 x 350 x 145 mm Weight: 3.5 kg

Flex-LED Blue 10m lengths

FX fortune ball

The mirror ball effect is back! This club effect from the '70s has been re-invented and now comes with 6 DMX channels and it's even brighter than ever! A powerful 6 x 3W RGB LED is located inside

Galactic B1000 1W Blue Laser, ILDA & DMX

The Galactic B1000 is a professional 1Watt Blue laser. Due to the strong 1W output this unit is capable of making great beam shows at in- and outdoor events. If you combine the B1000 with his brother G300 (51332) you can make more creative beam shows. The unit has a 20K scanner pair which makes bigger projections possible with less flickering. It can be controlled by DMX, ILDA or operate in stand-alone mode with a pre-programmed show on SD card. Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations. Specifications Power Input: AC 100-240V, 50/60Hz Power Consumption: 40 Watt Laser Color: Blue 450nm Laser Power: 1000mW Laser Modulation: TTL Laser Class: 4 Scan Speed: 20K Scan Angle: +/-40˚ Control Modes: 2xAuto, 2xSound, Master/Slave, DMX, ILDA, SD-Card Control Display: LCD DMX Channels: 13 Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole Safety Features: Key switch, Interlock, Safety eye Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03 Dimensions: 385 x 310 x 162 mm (excl. bracket) Weight: 8 kg Accessories: 2 Keys, Interlock test connector, 1G SD card

LED ModulArc 288 segment

4 segments create a seamless circle 288 LED's in each segment stand alone or DMX control DMX Short 1-6 red 7-12 Green 13-18 Blue DMX full 1 dimmer 2 Strobe 3-8 Red 9-14 Green 15-20 Blue 21 Macro 22 Macro speed 23 Macro background level

LED Tube Light

With this RGB LED-Tube it is possible to control 7 different colours ( red, green, yellow, blue, lila, cyan and white) and 14 different chase-programs; colour change, flow change 1 and 2, rainbow change, auto program and 9 different 2-coloured Chases, Stand-alone or via a (4 Ch.) DMX-512 controller. The LED Tube can be used in-and outdoor(IP-44). The LED has an extremely high light output and a very long lifetime. It can be used alone and is also row-mountable until 2000 pieces. Specifications Power consumption: 17 Watt / Tube-LED housing LED-lifetime: 100.000 hours (1000 Lumen/LED) Housing: Epoxy-coated Aluminium Controller: LED Controller: 41002 (not incl.) 19" LED Controller: 41003 (not incl.) LED PSU: 41001 (not incl.) Connection cable: 41056/41057/41051 /41052 (not incl.) Dimensions (LxWxH): 1001 x 50 x 80 mm (incl. mounting plate) 1001 x 50 x 70 mm (without mounting plate) Weight: 1,12 kg

LED Tube Lights - power supply

The LED PSU gives your LED Tube and controller the necessary power to run the system. The LED PSU is required after every 8 pieces of Tubes. The LED PSU has to be mounted within a row of 3 m from the nearest tube. Specifications Power supply: 300 Watt for up to 8 pieces! Dimensions: 320 x 140 x 70 mm (LxWxH) Weight: 2,32 kg

LED Tube Lights - RGB controller

Specifications System: DMX-512 and Stand-alone with 21 Scene-/Chase- programs Max. Tubes: 4000 RGB Tube LED's Controller Power supply: AC Adapt. 15V-500 mA (included) Dimensions: 320 x 210 x 90 mm (LxWxH) Weight: 2,3 kg Pre-set programs: 1; Black-out 2; All red 3; All green 4; All yellow 5; All blue 6; All purple 7; All cyan 8; All white 9; colour change 10; Slow Flow 1 11; Slow Flow 2 12; Roll Chase 1 13; Roll Chase 2 14; Multi Colour 15; Fast Flow 1 16; Fast Flow 2 17; 2 Colour Chase 18; 2 Colour Flow 19; Colour Fade 20; Auto Run 21; System Mode

LED Tube Lights - RGB & DMX controller

Same as basic controller but with direct channel control via DMX

Pixelbatten P25 MKII

Pixel Bubble 80 MKII incl 15 strings

The Pixel Bubble 80 MKII is a visual effect created by a matrix of 50mm RGB balls. It has a lot of useful improvements towards the first version. The length of the strings of pixel bubble 80 MKII can be adjusted with 1 meter from 2 till 6 meters. The standard set is delivered with 15 pcs of 1m strings which gives you 5 rows of 3 meter. Another big improvement is control protocols, besides the standard DMX protocol the pixcel bubble MKII can also be controlled with pixel map software by Artnet or Klingnet. A user-friendly menu will give you the possibility to set all network parameters, or select the correct DMX channel setting and address. It is also loaded with vivid patterns which can be selected in the basic DMX mode if you like to use it without any kind of preparation. The built-in Ethernet switch makes it possible to easily daisy chain your data network, external switches or routers are no longer needed. With the pixelbubble 80 MKII you can give your lightshow a creative visual boost. Specifications Light source: 5050SMD RGB Led Pixel Pitch: 200mm Included strings: 15 (W5/L3) String length: 1m Max length: 6m Bubbles / string: 5 Beam angle: 360° Refresh rate: 444Hz Operation: DMX, Klingnet, Artnet, Built-in programs DMX channels: 8, 150, 225, 300, 375, 450 Power Supply: 100~240VAC...50/60Hz Power Consumption: 90W max @ FO Mounting: top mounting points 3x M8 and 2x M10 Bar Size: 65 x 72 x 1050mm Bubble Size: 50mm Operating temp: -5° - +40° Cooling: Convection Power Connections: Blue/White Power connector Data Connection: RJ-45 in/out built-in switch Environment: IP-20 Weight: 2,5Kg

Pixelstrip Controller P25 MKII

Pixelstrip P25 MKII

Plasma ball 20cm

An extraordinary decoration for party-rooms, shops, etc. Blue light-beams criss-cross the plasma-ball The light-beams concentrate where the ball is touched Power supply: 230 V AC, 50 Hz ~ (via included power-unit) Power consumption: 4 W Dimensions (LxWxH): 200 x 200 x 290 mm Weight: 1 kg

Plasma tube

Striking flashes hit through the plasma-stick Flash-intensity controlled via the built-in microphone Height approx. 40 cm If touched, the flashes move to this point On/Off/Audio-switch

Showtec TL Unit 60cm LED Blacklight UV Tube

Specifications Voltage: AC 230V-50Hz Power Consumption: 7W LED: 410nm UV SMD LED Max. ambient temp. ta: 25°C Max. housing temp. tc: 55°C Min. distance from flammable surfaces: 0.5m Dimensions: 612 x 99 x 45mm Weight: 0,555 kg

Strobe - Showtec Data Flash

The Showtec Data Flash is a compact LED strobe with an intense strobe effect. It has 8 sections to create dynamic strobe effects. It has a rugged housing with a double bracket and Pro Power blue and white connections which makes is rental ready. Specifications Power Input: 100-250V AC, 50/60Hz Power Consumption: 125W Light source: SMD LEDs Control: Auto, Sound, DMX DMX Channels: 2,3 and 12 Control Display: 4 Digits LED Power connector: Pro Power in- & output Data Connector: 3p XLR In- & Output Dimensions: 263 x 81 x 293 mm Weight: 2,6 Kg

UV LED Bar 1000mm wide

The UV LED Bars create a blacklight effect with LEDs. They are available in the standard 100cm and 50cm lengths. The UV LED bars are high power, less fragile then the conventional tubes and have a long life time. Specifications LED Quantity: 18x 3W Driver Current : 680mA Beam Angle: 120° Wavelength: 410nm Electrical Input Voltage: 100~240VAC...47/63Hz Power consumption: 48W Physical Dimensions: 1000 x 60 x 115mm Weight: 2.30kg

UV LED Bar 500mm wide

The UV LED Bars create a blacklight effect with LEDs. They are available in the standard 100cm and 50cm lengths. The UV LED bars are high power, less fragile then the conventional tubes and have a long life time. Specifications LED Quantity: 9x 3W Driver Current : 680mA Beam Angle: 120° Wavelength: 410nm Electrical Input Voltage: 100~240VAC...47/63Hz Power consumption: 27W Physical Dimensions: 500 x 60 x 115mm Weight: 1.34kg

UV LED PAR 64 200W COB

Power consumption 200W Power supply voltage 100 – 245V Voltage frequency 50/60Hz Diode type COB Number of diodes 1 Diode power 200W Display LCD Matrix Wavelength <400nm Color UV Beam angle (min) 37° Beam angle (max) 37° Dimming Linear: 0 – 100% Flash frequency (min) 1Hz Flash frequency (max) 20Hz Number of DMX channels 2 DMX standard DMX 512 Control interface 4 buttons Operating modes DMX512, Strobe, Sound-controlled, Manual Features DMX Signal regeneration, Electronic protection against overheating Additional information Sound controlled strobe mode (available from the menu), Rotary Barn Door AC IN powerCON AC OUT powerCON DMX IN XLR – 3 pin DMX OUT XLR – 3 pin IP Rating IP20 Housing made ABS Cooling Active Height [cm] 28 Width [cm] 27 Depth [cm] 24 Weight [kg] 3.4