Audio Audio - Speakers & Amps

D12 Amp Rack

DAP-Audio Xi-10 speaker

The XI Series is designed for installation use. The Top cabinets have special mountings at the backside which fits the DAP D8429 Compact speaker wall bracket but also the K&M 24470/80 bracket. To create a nice design it has no inner adapter and only one grip on the backside with a recessed Speakon chassis. It is finished with scratch resistant paint and a fast and easy detachable metal grill. The horn (Xi-8/10) can be rotated if you like to use the cabinet vertical. The high power Subwoofer has a ultra-compact design so it will fit in every location. A special designed wall bracket makes it also possible to mount the subwoofer to a wall. The Xi-series has a HIFI sound quality and can handle high pressure levels.

DAP-Audio Xi-28B sub bass speaker

The Xi-28B is a compact lightweight subwoofer designed to combine with the Xi-8 or Xi-10 top cabinets. Together with the optional Xi-28B bracket it can be installed flat against the wall which makes it very suitable for situations were space is limited. The two 8" speakers and the sophisticated bass reflex horn housing offers a very powerful precise bass sound reproduction with high sound pressure levels. The XI Series is designed for installation use. The Top cabinets have special mountings at the backside which fits the DAP D8429 Compact speaker wall bracket but also the K&M 24470/80 bracket. To create a nice design it has no inner adapter and only one grip on the backside with a recessed Speakon chassis. It is finished with scratch resistant paint and a fast and easy detachable metal grill. The horn (Xi-8/10) can be rotated if you like to use the cabinet vertical. The high power Subwoofer has a ultra-compact design so it will fit in every location. A special designed wall bracket makes it also possible to mount the subwoofer to a wall. The Xi-series has a HIFI sound quality and can handle high pressure levels. Specifications Nominal Impedance: 4 Ohm Continuous power: 400 Watt Program power: 800 Watt Peak power: 1600 Watt Freq. Response (processed): 45 – 110 Hz Freq. Range (flat): 45 – 4000 Hz Internal Crossover: None Recommended High Pass Filter: 45 Hz, BW-24 Recommended Low Pass Filter: 110 Hz, LR-24 Sensitivity (Half Space): 100 dB/W /m Peak SPL at 1 m (Theoretical): 132 dB Nominal Dispersion (HxV): 360° x 180° Dimensions(W x H x D): 520 x 240 x 540 mm Net Weight: 18Kg

DAP-Audio Xi-6 speaker

The XI Series is designed for installation use. The Top cabinets have special mountings at the backside which fits the DAP D8429 Compact speaker wall bracket but also the K&M 24470/80 bracket. To create a nice design it has no inner adapter and only one grip on the backside with a recessed Speakon chassis. It is finished with scratch resistant paint and a fast and easy detachable metal grill. The horn (Xi-8/10) can be rotated if you like to use the cabinet vertical. The high power Subwoofer has a ultra-compact design so it will fit in every location. A special designed wall bracket makes it also possible to mount the subwoofer to a wall. The Xi-series has a HIFI sound quality and can handle high pressure levels.

DAP Hanging bracket for Xi-10

DAP Hanging bracket for Xi-28B

The Xi-28B hanging bracket is designed to install the Xi-28B flat against the surface without any loss of space. It is a heavy duty bracket which consists of 2 parts. One part must be screwed on the Xi-28B and the other one at the wall. Once both parts have been assembled you can hang the sub into the wall part. This makes the installation very easy. A rubber seal will prevent disturbing resonations and 2 small bolts will fix the sub.

DAP Hanging bracket for Xi-6

DAP PM-82 white speaker

• Light weight Plastic speaker cabinet. • Ideal for background music. • Available in black and white housing. Specifications Power Rating (Low + High): 85 Watt RMS Frequency Response: 45 – 20.000 Hz Efficiency: 90 dB/W/m (Full Space) Bass speaker: 8" polypropylene High speaker: 0,75" dome Dimensions (LxWxH): 420 x 249 x 253 mm Weight: 12 kg

DAP PMR-62 50w powered speaker

Specifications Power Rating (Low + High): 50 Watt RMS Frequency Response: 55– 20.000 Hz Efficiency: 89 dB/W/m (Full Space) Bass speaker: 6,5" polypropylene High speaker: 0,75" dome EQ section: 2 bands eq +/- 15 dB Gain: 30 dB (max.) Dimensions (LxWxH): 348 x 203 x 208 mm Weight: 7,8 kg

DAP Qi-4400 amplifier

A perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for each stereo pair. With the SMPS and Class-D amplification it is a light weight solution with a high efficiency power consumption / power output ratio. An advanced protection circuit will protect the amplifier and it's connected speakers. It has a short circuit/ thermal, DC ,RF protection and a soft start system. The Qi-amplifiers are made with high-quality low deviation components to ensure a perfect sound quality and a long life time. Specifications Output power Stereo 4Ohm: 4x 400W Stereo 8Ohm: 4x 250W Bridge 8Ohm: 2x 800W Parameters S/N Ratio: >90dB Input sensitivity: 0,7V Input impedance: 20kOhm Bal./10Kohm unbal. Technology: Class-D Protection: short circuit, DC, RF, Soft start Cooling: Temp controlled fan Power supply: SMPS Connections Input: 4x XLR Output: 4x Speaker connector Power: IEC Physical Dimensions: 388 x 435 x 44 (WxHxD) Installation depth: 370 (excl. conn.) Weight: 5.8Kg Electrical Input Voltage: 100~240VAC...50/60Hz Power consumption: 875W

D&B D12 power amplifier

The 3 RU two channel D12 amplifier delivers medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier. The D12 utilizes an autosensing switch mode power supply for mains voltages 120 V/230 V, 50 - 60 Hz (optional 100/200V). The D12 amplifier incorporates d&b SenseDrive for accurate control of LF drivers in d&b loudspeakers driven in 2-Way Active mode or in actively driven d&b subwoofers. When the D12 is fitted with EP5 connectors and appropriate 5 wire cabling, d&b SenseDrive can be used, resulting in an extremely precise bass performance even at high levels. NL4 and NL8 connector options are also available. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively. Control and indicators POWER Mains power switch SCROLL/EDIT Digital rotary encoder Display Liquid Crystal Display (LCD)/120 x 32 pixel ISP, GR, OVL A/B LED indicators Digitial Signal Processing Equalizer 4-band PEQ/Notch Latency analog and digital inputs 0.3 msec. Delay setting 0.3 - 340 msec. with 0.1 msec. detents Configurations current d&b loudspeakers and linear mode Function switches d&b loudspeaker specific circuits Frequency generator Pink noise or Sine wave Sampling rate 96 kHz/27 Bit ADC/24 Bit DAC Connectors INPUT ANALOG (A1, A2) 3 pin XLR female ANALOG LINK (A1, A2) 3 pin XLR male INPUT DIGITAL (D1, D2) 3 pin XLR female AES 3 DIGITAL LINK (Output) 3 pin XLR male Sampling rate 48 kHz/96 kHz OUT CHANNEL A/B NL4 optional EP5/NL8 REMOTE 2 x RJ 45 parallel, CAN-Bus SERVICE SUB-D9 female Mains connector powerCON® 1 Data (linear setting with subsonic filter) Rated output power (THD + N < 0.5%, both channels driven) CF = 6 dB at 4 / 8 ohms CF = 12 dB at 4 / 8 ohms 2 x 1200 / 750 W 2 x 1600 / 800 W S/N ratio (unweighted, RMS) > 110 dBr Power supply Autosensing switch mode power supply for 115/230 V, 50 - 60 Hz optional 100/200 V, 50 - 60 Hz Dimensions, weight Height x width x depth 3 RU x 19” x 353 mm/13.9” Weight 13 kg/28.7 lb

D&B Q7 speaker

The Q7 is a 75° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz. The Q7 with the horn rotated is used to mount the loudspeaker horizontally where space is limited, or the maximum horizontal pattern control is needed and when added to the bottom of Q1 arrays. The Q7 can be used as a stand-alone full range system, in combination with other Q-Series cabinets ground stacked or mounted on a high stand with a swivel bracket. They can also be combined in flown array systems. The Q7 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. Data Components 2 x 10" driver/1.3" compression driver Max. sound pressure (1m, free field)1 with D12/D20 134 dB SPL Power handling capacity (RMS/peak 10 ms) 400/1600 W Frequency response (-5 dB) 60/1002 Hz - 17 kHz Nominal dispersion angle (h x v) 75° x 40°34 CD Cabinets per channel D6/D12/D20/D80 2 Dimensions mm (H x W x D) 580 x 308 x 410 Weight kg 22 Dimensions inch (H x W x D) 22.8 x 12.1 x 16.1 Weight lb 49

D&B Q7 speaker bracket

D&B Q sub speaker

The Q-SUB is an actively driven low compression bass-reflex loudspeaker fitted with a high excursion 18" driver. d&b SenseDrive technology is available when powered by the D12 amplifier. The Q-SUB is mechanically compatible with the Q1 and Q7; ten sockets in the front grill and side panels for Q-Series rigging components permit use in various combinations, either flown or ground stacked. The Q-SUB cabinet is constructed from marine plywood with an impact resistant paint finish, a pair of handles, four heavy duty wheels and an M20 threaded flange in the top panel to accept a loudspeaker stand. The front of the loudspeaker cabinet is protected by a rigid metal grill covered with replaceable acoustically transparent foam and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel. Two runners protect the bottom of the cabinet from scratching; these are located in correspondingly shaped recesses in the top panel to prevent movement when stacked. Fittings for securing an optional wooden lid are also provided. Data Components 18" driver Max. sound pressure (1m, free field)1 with D6 with D12/D20 with D80 129 db SPL 133 db SPL 133 dB SPL Power handling capacity (RMS/peak 10 ms) 400/1600 W Frequency response (-5 dB) 40 Hz - 130/1002 Hz Cabinets per channel D6/D12/D20/D80 2 Dimensions mm (H x W x D) 493 x 580 x 6683 Weight kg 42 Dimensions inch (H x W x D) 19.4 x 22.8 x 26.33 Weight lb 93

EV Sx80 175 watt speaker

Sx80 175-Watt Two-Way Speaker System • 8-inch woofer and DH2005 compression driver for great sound and reliable performance • Constant-directivity 90° x 65° highfrequency horn with VariPath™ geometry for uniform coverage • Ring-Mode Decoupling (RMD™) for increased intelligibility • 175-watt long-term rms power capacity • Molded-in attachment points allow for use with brackets

JBL Control 1 Speaker with wall brackets

Legendary JBL Professional performance housed in a compact form-factor; the Control® 1 Pro features a professional crossover network coupled with professional drivers making it ideal for even the most demanding near-field audio applications. The Control 1 Pro's updated crossover network design provides steeper crossover slopes for exceptional sonic performance and improved consistency throughout the listening area. The included wall- mount bracket enables the unit to be secured against a wall or other flat surface. Moreover, the rugged molded enclosure houses magnetically shielded transducers, making the Control 1 Pro well-suited for use with video and computer monitors, or other magnetically sensitive equipment. Two-Way Professional Compact Loudspeaker System FREQUENCY RANGE (-10 DB) 80 Hz to 20 kHz FREQUENCY RESPONSE (± 3 DB) I00 Hz - 18 kHz POWER CAPACITY I50 W

Portable PA with UHF, USB/SD/FM & Bluetooth

QXPA-plus Portable PA with UHF, USB/SD/FM & Bluetooth 178.857UKQX15PA-PLUS Good stock Complete portable PA unit in a QX-series cabinet. Built-in amplifier operating from mains or internal rechargeable battery powering a main driver and compression driven horn unit. 2 x UHF handheld ... 2 x UHF wireless microphones Bluetooth connectivity Built in USB/SD/FM media player Rechargeable battery or mains operation

QSC PLX2502 amplifier

Providing 750 W/channel into 4 ohms and 1250 W/channel into 2 ohms with a lightweight PowerLight power supply, the PLX2502 is ideal for the most demanding live sound applications. Features Very light weight ("02" models, 21 lb / 9.5 kg, "04" models 13 lb / 5.9 kg). Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged. Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. 02 models also feature bridge and parallel mode LED indicators. Two Speakon® NL4 output connectors provide positive-locking speaker connections. Upper connector provides both channel outputs on all four poles (Channel 1: 1+, 1-; channel 2: 2+, 2-) for bridged mono or for single-cable connection to bi-amplified speakers. 21-position front-panel gain controls for precise, repeatable amplifier adjustment. Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation. Patented PowerLight power supply technology with other patents pending.

White foreground speaker 65watt

High quality 2-way speaker for indoor or outdoor use. The moulded speaker cabinet makes them ideal for outdoor events, swimming pools, garden areas and marine or boat use. 2 way speaker system with crossover network Rotary selector switch for 100V line tappings or 8 ohms operation Weatherproofed IP35 UV protected ASTM D4329 Indoor/outdoor equalisation switch Gold plated binding posts Mounting bracket Optional mounting by M6 screw sockets Available in white or black finish Supplied single Woofer133mmØ (5.25") Tweeter13mmØ (0.5") IP ratingIP35 Frequency response110Hz - 20kHz Power max. : 8 Ohms130W Power rms : 8 Ohms65W SPL @ 1W/1m86dB Dispersion angle145° Tappings40W, 20W, 10W, 5W + 8 ohms Impedance : 100V250, 500, 1k, 2k Ohms Dimensions252 x 177 x 142mm Weight3.06kg

Yamaha DXR8 floor stand

To use DXR8 and monitor speaker

Yamaha DXR8 powered speakers

DXR8 8” 2-way Active Loudspeaker The most compact of the DXR Series speakers, the DXR8 makes the most of its 1100W of power, delivering extremely high output while maintaining outstanding resolution. Adding a DXS12 subwoofer gives you an ultra-compact high-power SR system.

Yamaha DXR8 U bracket

by Yamaha Available from these sellers. U Bracket for the DXR8 Attach your Yamaha DXR8 powered speakers to a wall or support beam for permanent installation Includes brackets and all mounting hardware Attach your Yamaha DXR8 powered speakers to a wall or support beam for permanent installation Includes brackets and all mounting hardware